manualshive.com logo in svg

Dell Studio 1435, Руководство по обслуживанию

Поделиться
Скачать
Dell Studio 1435 Скачать руководство пользователя страница 39

 

 

  

4.

Connect the speaker cable to the system board connector (see 

Replacing the Speakers

).  

 

 

  

5.

Replace the palm rest (see 

Replacing the Palm Rest

).  

 

 

  

6.

Replace the keyboard (see 

Replacing the Keyboard

).  

 

 

  

7.

Replace the center control cover (see 

Replacing the Center Control Cover

).  

 

 

  

8.

Replace the processor heat sink and processor (see 

Replacing the Processor Heat Sink

 and 

Installing the Processor

).  

 

 

  

9.

Replace the hard drive (see 

Replacing the Hard Drive

).  

 

 

  

10.

Reinstall the memory modules and Mini-Cards, if any.  
 

 

  

11.

Reinstall the ExpressCards in the ExpressCard slot, if any.  
 

 

 

12.

Turn on the computer.  
 

 

 

13.

Insert the CD that accompanied the replacement system board into the appropriate drive. Follow the instructions that appear on the screen.  
 

Back to Contents Page

 

 

 

 

NOTICE: 

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in 

damage to the computer.

 

NOTE: 

After you have replaced the system board, enter the computer Service Tag into the BIOS of the replacement system board.

Содержание Studio 1435










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды