manualshive.com logo in svg

Dell Studio 1435, Руководство по обслуживанию

Поделиться
Скачать
Dell Studio 1435 Скачать руководство пользователя страница 27

  

 

 

7.

Rotate the keyboard downward to expose the keyboard cable.  
 

 

  

8.

Release the connector latch that secures the keyboard cable to the connector on the system board and remove the cable.  
 

 

  

9.

Lift the keyboard off the computer.  
 

 

Replacing the Keyboard  

 

 

1.

Slide the keyboard cable into the connector on the system board and pull down on the connector latch that secures the keyboard cable to the system 
board.  
 

 

 

2.

Align the tabs along the bottom of the keyboard with the slots of the palm rest and slide the keyboard under the palm rest.  
 

 

  

3.

Replace the two screws at the top of the keyboard.  
 

 

  

4.

Align the hooks beneath the keyboard surround and snap it into place.  
 

 

  

5.

Replace the center control cover (see 

Replacing the Center Control Cover

).  

 

 

  

6.

Slide the battery into the bay until it clicks into place.  
 

Back to Contents Page

 

 

 

1 

screw (2) 

2 

keyboard 

3 

keyboard tab (6) 

4 

connector latch 

5 

keyboard cable 

 

 

 

 

 

NOTICE: 

The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the 

keyboard.

Содержание Studio 1435










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды