manualshive.com logo in svg

Dell Studio 1435, Руководство по обслуживанию

Поделиться
Скачать
Dell Studio 1435 Скачать руководство пользователя страница 26

Back to Contents Page

  

 

 Keyboard  

Dell Studio™ 1435 Service Manual 

 

  

Removing the Keyboard 

 

  

Replacing the Keyboard 

 

 

 

 

 

Removing the Keyboard  

 

 

1.

Follow the procedures in 

Before You Begin

.  

 

 

  

2.

Remove the center control cover (see 

Removing the Center Control Cover

).  

 

 

  

3.

Ease the keyboard surround up with a plastic scribe.  
 

  

 

 

4.

Lift the keyboard surround off the computer.  
 

 

 

5.

Remove the two screws securing the keyboard to the palm rest.  
 

 

 

6.

Carefully slide the keyboard out of the computer and turn it over as shown in the illustration. Do not pull hard on the keyboard.  
 

 

CAUTION: 

Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.

 

NOTICE: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such 

as a connector on the back of the computer).

 

NOTICE: 

To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the 

computer.

1 

keyboard surround 

 

NOTICE: 

The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the 

keyboard.

 

NOTICE: 

Be extremely careful when removing and handling the keyboard. Failure to do so could result in scratching the display panel.

Содержание Studio 1435










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды