Dell Storage Center SC200, Руководство по обслуживанию

Страница: 32 / 36

Chapter 4 SC200/SC220 Specifications
28 Storage Center SC200 and SC220 Enclosures Service Guide
Back-Panel Connectors (per EMM)
SAS connectors SAS A and B connectors for connection to the controller and for
expansion to an additional enclosure
Note:
SAS connectors are SFF-8086/SFF-8088 compliant.
Serial connector One 6-pin UART mini-DIN connector
Note:
For engineering use only
LED Indicators
Front panel • One two-color LED indicator for system status
• One single-color LED indicator for power status
Hard drive carrier • One single-color activity LED
• One two-color LED status indicator per drive
EMM Three two-color LED status indicators, one for each of the two EMM
SAS ports and one for the EMM status
Power supply/cooling fan Three LED status indicators for power supply status, power supply/
cooling fan fault status, and AC status
Power Supplies
AC power supply (per power supply)
Wattage 700 W
+5V up to 155W; +12V up to 624W; +5Vsb up to 10W
Voltage 100–240 VAC (8.6 A–4.3 A)
Heat dissipation SC200: 191-147W
SC220: 133-114W
Input frequency 50/60 Hz
Max input power 990KVA
Input current 11A@90VAC
Maximum inrush current Under typical line conditions and over the entire system ambient
operating range, the inrush current may reach 55A per power supply
for 10 ms or less.
Available Hard Drive Power (Per Slot)
Supported hard drive power
consumption (continuous) • SC200:
Up to 1.16 A at +5 V
Up to 1.6 A at +12 V
• SC220:
Up to 1.2 A at +5 V
Up to 0.5 A at +12 V