|
29
Ethernet cabling:
SonicPoint-ACe vs
SonicPoint-ACi
While the SonicPoint-ACe may be powered with either the
included external power adaptor or through Power over
Ethernet (PoE), the SonicPoint-ACi must be powered using
Power over Ethernet (PoE).
Both SonicPoint appliances should be cabled with CAT5,
CAT5e, or CAT6 Ethernet cabling. In addition, the SonicPoint-
ACi will not function unless the Ethernet connection to its LAN
port is powered either by using the Dell SonicWALL PoE line
injector (sold separately), or by using a third-party 802.3af
compliant PoE powered switch. For more information on the
Dell SonicWALL PoE injector, visit:
http://www.sonicwall.com/us/en/products.html
Connecting the PoE
cable
If your deployment uses a Dell SonicWALL PoE injector, read
and comply with instructions provided with the PoE first, then
complete the following steps:
1 Plug the power cord of the Dell SonicWALL PoE injector
into the power outlet.
2 Using Ethernet cable (not included), connect the
Data in port on the Dell SonicWALL PoE Injector to the
WLAN zone interface that you created earlier.
3 Using Ethernet cable, connect the Data and Power out
port on the Dell SonicWALL PoE injector to the LAN
port on the back of your SonicPoint.
4 Wait for the link LED to illuminate. This indicates an
active connection. It takes approximately one minute
for the Dell SonicWALL security appliance to auto-
provision.
SonicPoint_ACe_GSG.book Page 29 Monday, September 29, 2014 5:23 PM
Draft
Document
Содержание Sonicwall Sonicpoint Ace
Страница 1: ...Dell SonicWALL SonicPoint ACe Getting Started Guide D r a f t D o c u m e n t ...
Страница 28: ...26 SonicPoint_ACe_GSG book Page 26 Monday September 29 2014 5 23 PM D r a f t D o c u m e n t ...
Страница 53: ...SonicPoint_ACe_GSG book Page 1 Monday September 29 2014 5 23 PM D r a f t D o c u m e n t ...