Dell Sonicwall Sonicpoint Ace, Руководство по началу работы

Страница: 27 / 53

| 25
Configuring the network
interface
Each SonicPoint or group of SonicPoints must be connected to
a physical network interface that is configured for Wireless.
SonicOS by default provides a standard wireless zone (WLAN),
which can be applied to any available interface.
To configure a network interface using the standard wireless
(WLAN) zone:
1 Navigate to the Network > Interfaces page and click
Configure for the interface to which your SonicPoints
are connected.
2 Select WLAN for the Zone type.
3 Select Static for the IP Assignment.
4 Enter a static IP Address in the field. Any private IP is
appropriate for this field, as long at it does not
interfere with the IP address range of any of your other
interfaces.
5 Enter a Subnet Mask. In our example 255.255.255.0 is
an appropriate mask.
6 Optionally, choose a SonicPoint Limit for this
interface. This option helps limit resources on port-by-
port basis when using SonicPoints across multiple ports.
7 Optionally, choose to allow Management and User
Login mechanisms if they make sense in your
deployment. Remember that allowing login from a
wireless zone can pose a security threat, especially if
you or your users have not set strong passwords.
SonicPoint_ACe_GSG.book Page 25 Monday, September 29, 2014 5:23 PM
Draft
Document