Rack Rails
Rack rails are used to install the storage controller into a rack.
Remove the Rack Rails
Perform the following steps to remove rack rails for an SC7020 storage system.
Prerequisites
1.
Use SupportAssist to send diagnostic data to Dell Technical Support.
2.
Shut down the storage system using the Dell Storage Manager Client.
About this task
NOTE: Replacing rack rails must be performed during a scheduled maintenance window when the
Storage Center system is unavailable to the network.
Steps
1.
Make sure all the cables are labeled.
2.
Disconnect all of the cables from the storage system.
3.
Loosen the screws in the chassis ears that secure the chassis to the rack.
Figure 8. Loosen the Screws
4.
Remove the storage system from the rack.
5.
Remove the rack rails from the rack.
Replacing SC7020 Storage System Components
15
