Dell S6100, Руководство по настройке

Страница: 1516 / 1743

Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage Information The
oid-tree
variable is a full sub-tree starting from 1.3.6 and cannot specify the name of a sub-tree or a MIB.
The following Example configures a view named rview that allows access to all objects under 1.3.6.1.
Example
Dell# conf
Dell#(conf) snmp-server view rview 1.3.6.1 included
Related Commands
• show running-config snmp — displays the SNMP running configuration.
snmp-server vrf
Configures an SNMP agent to bind to a specific VRF.
Syntax snmp-server vrf vrf-name
To undo the SNMP agent configuration, use the
no snmp-server vrf vrf-name
command.
Parameters
vrf vrf-name Enter the keyword
vrf
and then the name of the VRF to associate an SNMP agent with
that VRF.
Defaults Not Enabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
1516 Simple Network Management Protocol (SNMP) and Syslog