Dell S6100, Руководство по настройке

Страница: 75 / 1743

Version Description
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Example
Dell#show os-version
RELEASE IMAGE INFORMATION :
-----------------------------------------------------------
Platform Version Size ReleaseTime
S-Series:S6100-ON 9.10(0.0) 54246311 Sep 12 2015 04:21:53
TARGET IMAGE INFORMATION :
-------------------------------------------------
Type Version Target checksum
runtime 9.10(0.0) Control Processor passed
BOOT IMAGE INFORMATION :
--------------------------------------------------
Type Version Target checksum
boot flash 3.25.2.2 Control Processor passed
BOOTSEL IMAGE INFORMATION :
-----------------------------------------------------
Type Version Target checksum
boot selector 3.25.0.3 Control Processor passed
FPGA IMAGE INFORMATION :
--------------------------------------------------------
Card FPGA Name Version
stack-unit 1 S6100-ON SWITCHCARD CPLD 4
stack-unit 1 S6100-ON IOM CPLD1 18
stack-unit 1 S6100-ON IOM CPLD2 18
stack-unit 1 S6100-ON IOM CPLD3 18
stack-unit 1 S6100-ON IOM CPLD4 18
stack-unit 1 S6100-ON MSS FPGA 0.8
stack-unit 1 S6100-ON MSS IAP 1.22
stack-unit 1 S6100-ON OOB-FPGA 0.7
Dell#
Usage Information
NOTE: A filepath that contains a dot ( . ) is not
supported.
show running-config
Display the current configuration and display changes from the default values.
Syntax show running-config [ entity ] [configured] [status] [compressed]
Parameters
entity (OPTIONAL) To display that entity’s current (non-default) configuration, enter one of the
following keywords:
NOTE: If you did not configure anything that entity, nothing displays and the
prompt returns.
aaa for the current AAA configuration
acl for the current ACL configuration
arp for the current static ARP configuration
File Management 75