manualshive.com logo in svg

Dell QLogic QL45212, Руководство пользователя, Страница: 2 / 101

Поделиться
Скачать
Dell QLogic QL45212 Скачать руководство пользователя страница 2

ii

BC0154503-00  B

User’s Guide—25Gb Intelligent Ethernet Adapter

QL45212

This document is provided for informational purposes only and may contain errors. QLogic reserves the right, without 
notice, to make changes to this document or in product design or specifications. QLogic disclaims any warranty of any 
kind, expressed or implied, and does not guarantee that any results or performance described in the document will be 
achieved by you. All statements regarding QLogic's future direction and intent are subject to change or withdrawal 
without notice and represent goals and objectives only.

Document Revision History

Revision A, January 11, 2015

Revision B, April 19, 2016

Changes

Sections Affected

Updated the list of features to replace the list of 
supported Dell servers with a general reference to 
the PowerEdge product line.

Added NPAR and RoCE to the list of features.

Added TSO, LSO, GSO, LOR, RSC, and Microsoft 
dynamic VMQ and Linux Multiqueue to the list of 
features.

Updated the number of classification filters from 
512 to 1,024.

Removed the “Microsoft Windows Server only” 
qualification from the virtualization feature.

“Features” on page 1

In 

Table 2-1

, updated the list of supported direct 

attach copper cables.

In 

Table 2-2

, updated the supported Windows and 

Linux operating system versions; added VMware.

“System Requirements” on page 5

Updated the section titled 

Installing the Add-In NIC

 

to 

Installing the Adapter

.

“Installing the Adapter” on page 7

Updated the section titled 

Installing the Linux Driv-

ers

 and merged it with 

Removing Linux Drivers

 

and 

Network Installations

 to create two new sec-

tions describing the installation of Linux drivers 
with and without RoCE.

“Installing the Linux Drivers without RoCE” on 
page 9

“Installing the Linux Drivers with RoCE” on 
page 14

Updated the section titled 

Setting Values for 

Optional Properties

 to 

Linux Driver Optional 

Parameters

.

“Linux Driver Optional Parameters” on page 16

Updated the section titled 

Driver Defaults 

to 

Linux 

Driver Parameter Defaults

. Reorganized the list of 

defaults into a table.

“Linux Driver Parameter Defaults” on page 16

Updated the section titled 

Driver Messages 

to 

Linux Driver Messages

.

“Linux Driver Messages” on page 17

Содержание QLogic QL45212






































































































Отзывы:

Нет отзывов