manualshive.com logo in svg

Dell QLogic QL45212, Руководство пользователя, Страница: 32 / 101

Поделиться
Скачать
Dell QLogic QL45212 Скачать руководство пользователя страница 32

3–Installing Drivers

Windows Driver Software

17

BC0154503-00  B

Linux Driver Messages

To set the Linux driver message detail level, use one of the following commands:

ethtool -s 

<interface>

 msglvl 

<value>

modprobe qede debug=

<value>

where 

<value>

 represents bits 0–15, which are standard Linux networking 

values, and bits 16 and greater are driver specific.

Statistics

Detailed statistics and configuration information can be viewed using the ethtool 
utility. See the ethtool man page for more information.

Windows Driver Software

This section describes the following topics:

Installing the Windows Drivers

Removing the Windows Drivers

Managing Adapter Properties

Setting Power Management Options

Installing the Windows Drivers

You can run a software or driver Dell update package in two ways:

Running the Dell Update Package in the GUI

Running the Dell Update Package from the Command Line

Running the Dell Update Package in the GUI

To run the Dell update package in the GUI:

1.

Double-click the icon representing the Dell update package file.

NOTE

The actual file name of the Dell update package varies.

Содержание QLogic QL45212






































































































Отзывы:

Нет отзывов