Dell PS6500 Скачать руководство пользователя страница 8

Страница: 8 / 68

PS6500 Hardware Maintenance

Preface

Note:

If you do not have an Internet connection, you can find contact information on your purchase invoice,
packing slip, bill, or Dell product catalog.

Use the following procedure to contact Dell for sales, technical support, or customer service issues:

1. Visit

support.dell.com

or the Dell support URL specified in information provided with the Dell product.

2. Select your locale. Use the locale menu or click on the link that specifies your country or region.

3. Select the required service. Click the "Contact Us" link, or select the Dell support service from the list of

services provided.

4. Choose your preferred method of contacting Dell support, such as e-mail or telephone.

Online Services

You can learn about Dell products and services using the following procedure:

1. Visit

www.dell.com

(or the URL specified in any Dell product information).

2. Use the locale menu or click on the link that specifies your country or region.

Warranty Information

The PS6500 array warranty is included in the shipping box. For information about registering a warranty, visit

support.dell.com/EqualLogic

Содержание PS6500





































































Результаты поиска

Содержание PS6500

Отзывы:

Бренды по названию

Популярные бренды

Dell PS6500, Руководство по оборудованию

Результаты поиска

Содержание PS6500

Отзывы:

Бренды по названию

Популярные бренды