manualshive.com logo in svg

Dell Precision Workstation 490, Руководство пользователя

Поделиться
Скачать
Dell Precision Workstation 490 Скачать руководство пользователя страница 26

 

  

2.

Right-click the 

Volume

 icon of the RAID volume you want to delete, and select 

Delete Volume

.  

 

 

  

3.

On the 

Delete RAID Volume Wizard

 screen, click 

Next

.  

 

 

  

4.

Highlight the RAID volume you want to delete in the 

Available

 box, click the right-arrow button to move the highlighted RAID volume into the 

Selected

 

box, and then click 

Next

.  

 

 

  

5.

Click 

Finish

 to delete the volume.  

 

 

 

About Migrating to a RAID Configuration  

Migration is only possible from a factory-installed RAID configuration, if when you ordered your system it was configured for RAID and if you are migrating 
between certain RAID configurations. 

 

 

Migrating to a RAID Level 0 Configuration  

 

 

1.

Set your computer to RAID-enabled mode (see 

Setting Your Computer to RAID-Enabled Mode

).  

 

 

  

2.

Click the 

Start

 button and point to 

All Programs

®

 Intel(R) Matrix Storage Manager

®

 Intel Matrix Storage Console

 to launch the Intel Storage Utility. 

 
 

If you do not see an 

Actions

 menu option, you have not yet set your computer to RAID-enabled mode (see 

Setting Your Computer to RAID-Enabled 

Mode

). 

 

 

3.

On the 

Actions

 menu, select 

Create RAID Volume From Existing Hard Drive 

to

 

launch the Migration Wizard.  

 

 

  

4.

Click 

Next

 on the Migration Wizard screen.  

 

 

  

5.

Enter a RAID volume name or accept the default.  
 

 

  

6.

From the drop-down box, select 

RAID 0

 as the RAID level

. 

 

 

Select the strip size closest to the size of the average file you want to store on the RAID volume. If you do not know the average file size, choose 128 
KB as your strip size. 

 

 

7.

Select the appropriate strip size from the drop-down box, and then click 

Next

.  

 

Select the hard drive that you want to use as your source hard drive (it should be the hard drive containing the data or operating system files that you 
want to keep on the RAID volume). 

 

 

8.

On the 

Select Source Hard Drive

 screen, double-click the hard drive from which you want to migrate, and click 

Next

.  

 

 

  

9.

On the 

Select Member Hard Drive 

screen, double-click the hard drive(s) to select the member drive(s) to span the stripe array, and click 

Next

.  

 

 

  

10.

On the 

Specify Volume Size

 screen, select the 

Volume Size

 you want, and click 

Next

.  

 

 

 

11.

Click 

Finish

 to start migrating, or click 

Back

 to make changes. You can use your computer normally during the migration process.  

 

 

 

 

 

 

 

 

 

2-drive RAID 0 

 

 

3-drive RAID 0 

 

 

2-drive RAID 1 

 

 

3-drive RAID 5 

 

 

2-drive RAID 0

 

Not applicable 

2- to 3-drive migration possible 

Not possible 

Not possible 

 

 

3-drive RAID 0

 

Not possible 

Not applicable 

Not possible 

Not possible 

 

 

2-drive RAID 1

 

RAID 1 to RAID 0 migration possible  RAID 1 to RAID 0 migration possible  Not applicable 

RAID 1 to RAID 5 migration possible 

 

 

3-drive RAID 5

 

Not possible 

Not possible 

Not possible 

Not applicable 

 

NOTICE: 

In 

step 11

, all data contained on the member drive will be removed.

Содержание Precision Workstation 490











































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды