Dell Precision Tower 7910 Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 79

background image

Option

Description

Tower 7910

• SATA–0
• SATA–1

Default Setting:

All drives are enabled.

NOTE: If the hard drives are connected to a RAID controller
card, the hard drives will display {none} in all the fields. The
hard drives can be seen in the RAID controller card BIOS.

SMART Reporting

This field controls if the hard drive errors for the integrated
drives are reported during system startup. This technology is
part of the SMART (Self Monitoring Analysis and Reporting
Technology) specification.
•

Enable SMART Reporting

- This option is disabled by default.

USB Configuration

Allows you to enable or disable the internal USB configuration.
The options are:
• Enable Boot Support
• Enable Front USB Ports
• Enable internal USB ports
• Enable rear USB Ports

SAS RAID Controller (Tower 7910
only)

Allows you to control the operation
of the integrated SAS RAID HDD

controller.
•

Enabled

(Default)

• Disabled.

HDD Fans

Allows you to control the HDD fans.
Default Setting: depends on the system configuration

Audio

Allows you enable or disable the audio feature.
•

Enable Audio

(Default)

Memory Map IO above 4GB

Allows you enable or disable Memory

Map IO above 4GB.
•

Memory Map IO above 4GB

- This

option is disabled by default.

Thunderbolt

Allows you to enable or disable Thunderbolt device support

capability.
• Enabled
•

Disabled

(Default)

Miscellaneous devices

Allows you to enable or disable

various on board devices.
• Enable PCI Slot

PCI MMIO Space Size

This field controls the balance of 32-

bit memory available between PCI

58

«
...
56
57
58
59
60
...
»

Содержание Precision Tower 7910
















































































Отзывы:

Нет отзывов

Похожие инструкции для Precision Tower 7910

Бренд: Safco Страницы: 2

Бренд: IBM Страницы: 252

Бренд: Everex Страницы: 47

Wind-Surfer 44162

Бренд: Balt Страницы: 4

Бренд: Walfront Страницы: 39

Бренд: Morrow Страницы: 162

Бренд: MSI Страницы: 1

Бренд: MSI Страницы: 41

Бренд: Jupiter Страницы: 2

Бренд: Dell Страницы: 148

Бренд: Dell Страницы: 18

Бренд: Winmate Страницы: 60

Бренд: Winmate Страницы: 92

Integrated Touchscreen Computer J2 650

Бренд: J2 Страницы: 78

Бренд: Habey Страницы: 4

Бренд: Fluke Страницы: 124

Бренд: Axon Страницы: 51

Бренд: Star Lake Страницы: 67

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды