Dell Precision Tower 5810 Скачать руководство пользователя страница 65

Страница: 65 / 68

Feature

Specification

PCI Express x4

Tower 5810

two 164-pin connectors

PCI Express x16

Tower 5810

two 164-pin connectors

PCI 2.3

one 124-pin connector

Front I/O:

Front USB

one 14–pin connector

Internal USB

one type A female, one dual-port 2x5 header

Front panel control

one 2x14 pin connector

Front panel audio HDA header

one 2x5 pin connector

Hard drive/ Optical drive:

SATA

Tower 5810

• four 7-pin SATA connectors for HDD
• two 7-pin SATA connectors for ODD

Power

Tower 5810

one 24-pin and one 10-pin connector

Table 29. Controls and Lights

Feature

Specification

Power button light:

off — system is off or unplugged.

solid white light — computer is operating normally.

blinking white light — computer is in stand by.

solid amber light — the computer does not start, indicating a

problem with the system board or power supply.

blinking amber light — indicates a problem has occurred with

the system board.

Drive activity light

white light — blinking white light indicates that the computer

is reading data from, or writing data to the hard drive.

Network link integrity lights (back panel)

green light — A good connection at 10 Mbs exists between

the network and the computer

orange light — A good connection at 100 Mbs exists

between the network and the computer.

yellow light — A good connection at 1000 Mbs exists

between the network and the computer.

Network activity lights (back panel)

yellow light — flashes when there is network activity on the

connection.

Содержание Precision Tower 5810





































































Результаты поиска

Содержание Precision Tower 5810

Отзывы:

Похожие инструкции для Precision Tower 5810

Бренды по названию

Популярные бренды

Dell Precision Tower 5810, Руководство пользователя

Результаты поиска

Содержание Precision Tower 5810

Отзывы:

Похожие инструкции для Precision Tower 5810

Бренды по названию

Популярные бренды