Installing the Hard Drive
1.
If a 3.5–inch hard drive is installed on the computer, place the hard drive and press in on the latches
of the hard-drive caddy.
2.
If a 2.5–inch hard drive is installed on the computer, place the hard drive on the hard-drive caddy
and tighten the screws to secure the hard drive.
3.
Secure the hard-drive in the hard-drive cage and slide it inside the compartment.
4.
Connect the hard-drive power supply cable.
5.
Connect the hard-drive data cable.
6.
Install the
computer cover
.
7.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Speaker
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
computer cover
.
3.
Perform the following steps as shown in the illustration:
a. Disconnect the speaker cable from the system board [1].
b. Press down the clasp, lift and remove the speaker [2,3].
21
Содержание Precision Tower 5810
Страница 1: ...Dell Precision Tower 5810 Owner s Manual Regulatory Model D01T Regulatory Type D01T006 ...
Страница 31: ...6 Lift the metal plate out of the chassis 7 Remove the screws that secure the drive bay 31 ...
Страница 42: ...42 ...
Страница 67: ...Feature Specification Airborne contaminant level G1 as defined by ISA S71 04 1985 67 ...
