Dell Precision T3610 Скачать руководство пользователя страница 61

Страница: 61 / 65

Feature

Specification

PCI 2.3

one 124-pin connector

Front I/O:

Front USB

one 14–pin connector

Internal USB

one type A female, one dual-port 2x5 header

Front panel control

one 2x14 pin connector

Front panel audio HDA header

one 2x5 pin connector

Hard drive/ Optical drive:

SATA

T3610 / T5610

•

four 7-pin SATA connectors for HDD

•

two 7-pin SATA connectors for ODD

T7610

•

two 36-pin mini-SAS connectors for HDD

•

two 7-pin SATA connectors for ODD

Power

T3610

one 24-pin and one 8-pin connector

T5610

one 24-pin and two 8-pin connectors

T7610

one 24-pin and one 20-pin connector

Table 26. Controls and Lights

Feature

Specification

Power button light:

off — system is off or unplugged.

solid white light — computer is operating normally.

blinking white light — computer is in stand by.

solid amber light — the computer does not start, indicating a problem

with the system board or power supply.

blinking amber light — indicates a problem has occurred with the

system board.

Drive activity light

white light — blinking white light indicates that the computer is

reading data from, or writing data to the hard drive.

Network link integrity lights (back panel)

green light — A good connection at 10 Mbs exists between the

network and the computer

orange light — A good connection at 100 Mbs exists between the

network and the computer.

yellow light — A good connection at 1000 Mbs exists between the

network and the computer.

Network activity lights (back panel)

yellow light — flashes when there is network activity on the

connection.

Diagnostic lights:

off — computer is off or has completed POST.

Содержание Precision T3610


































































Результаты поиска

Содержание Precision T3610

Отзывы:

Похожие инструкции для Precision T3610

Бренды по названию

Популярные бренды

Dell Precision T3610, Руководство пользователя

Результаты поиска

Содержание Precision T3610

Отзывы:

Похожие инструкции для Precision T3610

Бренды по названию

Популярные бренды