Dell Precision M4500 Скачать руководство пользователя страница 10

Страница: 10 / 107

ME General Settings

To reach the

Intel Management Engine (ME) Platform Configuration

page, follow these steps:

1. Under the Management Engine BIOS Extension (MEBx) main menu, select

Intel ME General Settings

. Press <Enter>.

2. The following message appears: "Acquiring General Settings configuration".

The Intel MEBX main menu changes to the

Intel ME Platform Configuration

page.

This page allows the IT administrator to configure the specific functionality of the Intel ME, such as password, power options,

and so on. The following are quick links to the various sections.

Change Intel ME Password

Set PRTC

Power Control

Intel ME ON in Host Sleep

Idle Time Out

Previous Menu

Intel ME Platform Configuration

NOTE:

The option of "Intel ME State Control" appearing in previous versions of MEBx has been removed in order to

avoid end users accidentally disable Intel ME. The option can now be offered by system BIOS.

Change Intel ME Password

1. At the Intel ME New Password prompt, type your new password. (The password policies and restrictions are available

here

2. At the Verify Password prompt, re-type your new password. Your password is now changed.

Содержание Precision M4500












































































































Результаты поиска

Содержание Precision M4500

Отзывы:

Dell Precision M4500, Руководство администратора, Страница: 10 / 107

Результаты поиска

Содержание Precision M4500

Отзывы: