
Installing the WLAN Card
1.
Insert the WLAN card in its connector at a 45–degree angle in its slot.
2.
Tighten the screw to secure the WLAN card to the computer.
3.
Connect the antenna cables to their respective connectors marked on the WLAN card.
4.
Install:
a.
b.
5.
After Working Inside Your Computer
Removing the Wireless Wide Area Network (WWAN) Card
1.
Before Working Inside Your Computer
.
2.
Remove:
a.
b.
3.
Perform the following steps as shown in the illustration:
a. Disconnect the antenna cables from the WWAN card.
b. Remove the screw that secures the WWAN card to the computer.
c. Remove the WWAN card from the computer.
Installing the WWAN Card
1.
Place the WWAN card in its slot in the system board.
2.
Press the WWAN card down and tighten the screw to secure the WWAN card to the computer.
3.
Connect the antenna cables to their connectors on the WWAN card.
4.
Install:
a.
b.
5.
Содержание Precision M2800
