Dell Precision Compact 3260 Скачать руководство пользователя страница 82

Страница: 82 / 93

Table 14. System setup options—System Management menu (continued)

System Management

By default, the option is disabled.

Table 15. System setup options—Keyboard menu

Keyboard

Numlock Enable

Allows you to enable or disable the Numlock function when the system boots.

By default, the option

Fn Lock Options

is enabled.

Fn Lock Options

By default, the Fn lock option is enabled.

Lock Mode

By default, the

Lock Mode Secondary

option is enabled. With this option, the

F1-F2 keys scan the code for their secondary functions.

Table 16. System setup options—Pre-boot Behavior menu

Pre-boot Behavior

Adapter Warnings

Enable Adapter Warnings

Enable or disable the warning messages during boot when the adapters with
less power capacity are detected.

By default, the option is enabled.

Warning and Errors

Enable or disable the action to be done when a warning or error is encountered.

By default, the

Prompt on Warnings and Errors

option is enabled.

USB-C Warnings

Enable Dock Warning Messages

By default, the option is enabled.

Fastboot

Allows you to configure the speed of the UEFI boot process.

By default, the

Minimal

option is enabled.

Extend BIOS POST Time

Set the BIOS POST load time.

By default, the

0 seconds

option is enabled.

Table 17. System setup options—Virtualization menu

Virtualization

Intel Virtualization Technology

Enable Intel Virtualization Technology
(VT)

When enabled, the system will be able to run a Virtual Machine Monitor
(VMM).

By default, the option is enabled.

VT for Direct I/O

When enabled, the system will be able to perform Virtualization Technology for
Direct I/O (VT-d).

By default, the option is enabled.

Intel Trusted Execution Technology
(TXT)

Enable Intel Trusted Execution
Technology (TXT)

Specifies whether a measured Virtual Machine Monitor (MVMM) can use the
additional hardware capabilities that are provided by Intel Trusted Execution
Technology. The following must be enabled in order to enable Intel TXT.

●

Trusted Platform Module (TPM)

●

Intel Hyper-Threading

●

All CPU cores (Multi-Core Support)

●

Intel Virtualization Technology

BIOS setup

Содержание Precision Compact 3260






























































































Результаты поиска

Содержание Precision Compact 3260

Отзывы:

Похожие инструкции для Precision Compact 3260

Бренды по названию

Популярные бренды

Dell Precision Compact 3260, Руководство по обслуживанию

Результаты поиска

Содержание Precision Compact 3260

Отзывы:

Похожие инструкции для Precision Compact 3260

Бренды по названию

Популярные бренды