Dell Precision Compact 3260 Скачать руководство пользователя страница 78

Страница: 78 / 93

Table 8. System setup options—Display menu (continued)

Display

EcoPower

Enable or disable EcoPower Feature in your panel. EcoPower can increase
the battery life of your system by reducing the display brightness when
appropriate.

By default,

Enable EcoPower

option is enabled.

Full Screen Logo

Enable or disable full screen logo.

By default, the option is not enabled.

Table 9. System setup options—Connection menu

Connection

Wireless Device Enable

WLAN

Enable or disable the internal WLAN device.

By default, the option enabled.

Bluetooth

Enable or disable the internal Bluetooth device

By default, the option enabled.

Enable UEFI Network Stack

Enable or disable UEFI Network Stack and controls the on-board LAN
Controller.

By default, the

Enable UEFI Network Stack

option is enabled.

HTTPs Boot Feature

HTTPs Boot

Enable or disable the HTTPs Boot feature.

By default, the

HTTPs Boot

option is disabled.

Table 10. System setup options—Power menu

Power

Battery configuration

Enables the system to run on battery during peak power usage hours. Use the
table

Custom Charge Start

and

Custom Charge Stop

, to prevent AC power

usage between certain times of each day.

By default, the

Adaptive

option is enabled.

Advanced Configuration

Enable Advanced Battery Charge
Configuration

Enable or disable the advanced battery charge configuration.

By default, the

Enable Advanced Battery Charge Configuration

option is

disabled.

Peak Shift

Enables the system to run on battery during peak power usage hours.

Enable Peak Shift

By default, the

Enable Peak Shift

option is disabled.

Thermal Management

Enables to cool the fan and processor heat management to adjust the system
performance, noise, and temperature.

By default, the

Optimized

option is enabled.

USB Wake Support

Enable USB Wake Support

When enabled, the USB devices like a mouse or keyboard can be used to wake
the system from Standby, Hibernate, and Power Off.

NOTE:

This feature requires Deep Sleep Control to be disabled.

BIOS setup

Содержание Precision Compact 3260






























































































Результаты поиска

Содержание Precision Compact 3260

Отзывы:

Похожие инструкции для Precision Compact 3260

Бренды по названию

Популярные бренды

Dell Precision Compact 3260, Руководство по обслуживанию

Результаты поиска

Содержание Precision Compact 3260

Отзывы:

Похожие инструкции для Precision Compact 3260

Бренды по названию

Популярные бренды