Dell Precision 3440 Small Form Factor, Руководство по обслуживанию

Страница: 28 / 76

Steps
1. Align the notch on the solid-state drive with the tab on the solid-state drive connector.
2. Insert the solid-state drive at a 45-degree angle into the connector on the system board.
3. Replace the screw (M2x3) that secures the M.2 2230 PCIe solid-state drive to the system board.
Next steps
1. Install the 2.5 in. hard drive assembly .
2. Install the front bezel .
3. Install the side cover .
4. Follow the procedure in after working inside your computer .
Removing the M.2 2280 PCIe solid-state drive
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the side cover .
3. Remove the front bezel .
4. Remove the 2.5 in. hard drive assembly .
About this task
The following images indicate the location of the solid-state drive and provide a visual representation of the removal procedure.
28 Disassembly and reassembly