manualshive.com logo in svg

Dell PowerVault NX400, Руководство пользователя

Dell PowerVault NX400 - надежный и производительный сетевой хранилище данных для вашего бизнеса. Получите подробную информацию о настройке и использовании устройства владельца в бесплатном Руководстве пользователя. Скачайте его с manualshive.com прямо сейчас.

Поделиться
Скачать
background image

Menu Item

Description

User Accessible USB 
Ports

Allows you enable or disable the user accessible USB ports. Selecting Only Back Ports On 
disables the front USB ports and selecting All Ports Off disables both front and back USB ports. 
By default, the User Accessible USB Ports option is set to All Ports On.

Internal USB Port

Allows you to enable or disable the internal USB port. By default, the Internal USB Port option 
is set to On.

Internal SD Card Port Enables or disables the system’s internal SD card port. By default, Internal SD Card Port option 

is set to On.

NOTE: This option is displayed only if IDSDM is installed on the system board.

Internal SD Card 
Redundancy

If set to Mirror mode, data is written on both SD cards. If any one of the SD card fails, data is 
written to the active SD card. Data from this card is copied to the replacement SD card at the 
next boot. By default, Internal SD Card Redundancy option is set to Mirror.

NOTE: This option is displayed only if IDSDM is installed on the system board.

Embedded NIC1 and 
NIC2

Allows you to enable or disable the Operating System interface of the embedded NIC1 and 
NIC2 controller. By default, the Embedded NIC1 and NIC2 option is set to Enabled.

OS Watchdog Timer

Allows you to enable or disable the OS watchdog timer. When this field is enabled, the 
operating system initializes the timer and the OS watchdog timer helps in recovering the 
operating system. By default, the OS Watchdog Timer option is set to Disabled.

Embedded Video 
Controller

Allows you to enable or disable the Embedded Video Controller. By default, the embedded 
video controller is Enabled.

SR-IOV Global Enable Allows you to enable or disable the BIOS configuration of Single Root I/O Virtualization (SR-

IOV) devices. By default, the SR-IOV Global Enable option is set to Disabled.

Slot Disablement

Allows you to enable or disable available PCIe slots on your system. The Slot Disablement 
feature controls the configuration of PCIe cards installed in the specified slot.

CAUTION: Slot disablement must be used only when the installed peripheral card is 
preventing booting into the Operating System or causing delays in system startup. If the 
slot is disabled, both the Option ROM and UEFI driver are disabled.

Serial Communications Screen

Menu Item

Description

Serial Communication Allows you to select serial communication devices (Serial Device 1 and Serial Device 2) in the 

BIOS. BIOS console redirection can also be enabled and the port address used can be 
specified. By default, Serial Communication option is set to On without Console Redirection.

Serial Port Address

Allows you to set the port address for serial devices. By default, the Serial Port Address option 
is set to Serial Device 1=COM2, Serial Device 2=COM1.

NOTE: Only Serial Device 2 can be used for Serial Over LAN (SOL). To use console 
redirection by SOL, configure the same port address for console redirection and the serial 
device.

23

Содержание PowerVault NX400




























































































































Отзывы:

Нет отзывов

Похожие инструкции для PowerVault NX400

Acer DA241HL Quick Start Manual preview
DA241HL
Бренд: Acer Страницы: 4
Acer Aspire Z5600 Series Evaluation Manual preview
Aspire Z5600 Series
Бренд: Acer Страницы: 11
Acer Aspire T300 User Manual preview
Aspire T300
Бренд: Acer Страницы: 17
Acer Aspire T671 Specifications preview
Aspire T671
Бренд: Acer Страницы: 7
Radio Shack TRS-80 III Operation Manual preview
TRS-80 III
Бренд: Radio Shack Страницы: 30
Radio Shack TRS-80 Technical Manual preview
TRS-80
Бренд: Radio Shack Страницы: 42
Radio Shack TRS-80 Trsdos & Disk Basic Reference Manual preview
TRS-80
Бренд: Radio Shack Страницы: 192
Radio Shack TRS-80 Reference Manual preview
TRS-80
Бренд: Radio Shack Страницы: 274
Radio Shack TRS-80 Service Manual preview
TRS-80
Бренд: Radio Shack Страницы: 44
Radio Shack TRS-80 Preliminary User'S Manual preview
TRS-80
Бренд: Radio Shack Страницы: 30
Medion Erazer Instruction Manual preview
Erazer
Бренд: Medion Страницы: 92
Jason.L Elements Workstation 3 Person Run Assembly Instructions preview
Elements Workstation 3 Person Run
Бренд: Jason.L Страницы: 5
Gateway GT5062b User Manual preview
GT5062b
Бренд: Gateway Страницы: 96
AXIOMTEK eBOX625-842-FL Series User Manual preview
eBOX625-842-FL Series
Бренд: AXIOMTEK Страницы: 60
Aaeon BOXER-8230AI User Manual preview
BOXER-8230AI
Бренд: Aaeon Страницы: 45
ADLINK Technology Matrix MXC-4000 Series User Manual preview
Matrix MXC-4000 Series
Бренд: ADLINK Technology Страницы: 80
Alienware 13 R3 Setup And Specifications preview
13 R3
Бренд: Alienware Страницы: 20
Acer Aspire M1620 Service Manual preview
Aspire M1620
Бренд: Acer Страницы: 101

Бренды по названию

Популярные бренды

Загрузить еще бренды