Dell PowerVault NX400, Руководство пользователя

Страница: 15 / 123

Indicator Indicator Code
Link and activity
indicators are off The NIC is not connected to the network.
Link indicator is
green The NIC is connected to a valid network at its maximum port speed (1 Gbps or 10 Gbps).
Link indicator is
amber The NIC is connected to a valid network at less than its maximum port speed.
Activity indicator is
blinking green Network data is being sent or received.
Power Indicator Codes For Redundant Power Supplies
Each power supply has an illuminated translucent handle that serves as an indicator to show whether power is present
or whether a power fault has occurred.
Figure 7. Power Supply Status Indicator
1. power supply status indicator
Power Indicator
Pattern Condition
Not lit Power is not connected.
Green The handle/LED indicator lights green indicating that a valid power source is connected to the
power supply and that the power supply is operational.
Flashing amber Indicates a problem with the power supply.
CAUTION: When correcting a power supply mismatch, replace only the power supply with
the flashing indicator. Swapping the opposite power supply to make a matched pair can
result in an error condition and unexpected system shutdown. To change from a High
Output configuration to a Low Output configuration or vice versa, you must power down
the system.
CAUTION: AC power supplies support both 220 V and 110 V input voltages. When two
identical power supplies receive different input voltages, they can output different
wattages, and trigger a mismatch.
15