Dell PowerVault NX3200 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 133

background image

Menu Item

Description

Internal SD Card
Port

Enables or disables the system’s internal SD card port. By default, Internal SD Card Port option
is set to On.

NOTE: This option is displayed only if IDSDM is installed on the system board.

Internal SD Card
Redundancy

If set to Mirror mode, data is written on both SD cards. If any one of the SD card fails, data is
written to the active SD card. Data from this card is copied to the replacement SD card at the
next boot. By default, Internal SD Card Redundancy option is set to Mirror.

NOTE: This option is displayed only if IDSDM is installed on the system board.

Integrated Network
Card 1

Allows you to enable or disable the integrated network card 1. By default, the Integrated
Network Card 1 option is set to Enabled.

OS Watchdog Timer Allows you to enable or disable the OS watchdog timer. When this field is enabled, the

operating system initializes the timer and the OS watchdog timer helps in recovering the
operating system. By default, the OS Watchdog Timer option is set to Disabled.

Embedded Video
Controller

Allows you to enable or disable the Embedded Video Controller. By default, the embedded video
controller is Enabled.

SR-IOV Global
Enable

Allows you to enable or disable the BIOS configuration of Single Root I/O Virtualization (SR-IOV)
devices. By default, the SR-IOV Global Enable option is set to Disabled.

Slot Disablement

Allows you to enable or disable available PCIe slots on your system. The Slot Disablement
feature controls the configuration of PCIe cards installed in the specified slot.

CAUTION: Slot disablement must be used only when the installed peripheral card is
preventing booting into the Operating System or causing delays in system startup. If the slot
is disabled, both the Option ROM and UEFI driver are disabled.

Serial Communications Screen

Menu Item

Description

Serial Communication Allows you to select serial communication devices (Serial Device 1 and Serial Device 2) in the

BIOS. BIOS console redirection can also be enabled and the port address used can be
specified. By default, Serial Communication option is set to On without Console Redirection.

Serial Port Address

Allows you to set the port address for serial devices. By default, the Serial Port Address option
is set to Serial Device 1=COM2, Serial Device 2=COM1.

NOTE: Only Serial Device 2 can be used for Serial Over LAN (SOL). To use console
redirection by SOL, configure the same port address for console redirection and the serial
device.

External Serial
Connector

Allows you to associate the external serial connector to serial device 1, serial device 2, or
remote access device. By default, the External Serial Connector option is set to Serial Device1.

NOTE: Only Serial Device 2 can be used for SOL. To use console redirection by SOL,
configure the same port address for console redirection and the serial device.

23

«
...
21
22
23
24
25
...
»

Содержание PowerVault NX3200






































































































































Отзывы:

Нет отзывов

Похожие инструкции для PowerVault NX3200

Бренд: IBM Страницы: 198

Бренд: IBM Страницы: 32

Бренд: IBM Страницы: 32

Бренд: IBM Страницы: 32

Бренд: IBM Страницы: 46

Бренд: IBM Страницы: 32

Бренд: IBM Страницы: 72

Бренд: Elo TouchSystems Страницы: 3

6005 - Pro Microtower PC

Бренд: Compaq Страницы: 4

Бренд: Dell Страницы: 84

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 39

Бренд: Samsung Страницы: 48

Бренд: Samsung Страницы: 21

Бренд: Samsung Страницы: 27

Бренд: Samsung Страницы: 31

Бренд: Samsung Страницы: 78

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды