Dell PowerVault NX3200 Скачать руководство пользователя страница 16

Страница: 16 / 133

•

The

Getting Started Guide

provides an overview of setting up your system, and technical specifications. This

document is available online at support.dell.com/manuals.

•

The rack documentation included with your rack solution describes how to install your system into a rack, if

required.

•

Any media that ships with your system that provides documentation and tools for configuring and managing your

system, including those pertaining to the operating system, system management software, system updates, and

system components that you purchased with your system.

•

For the full name of an abbreviation or acronym used in this document, see the Glossary at support.dell.com/

manuals.

NOTE: Always check for updates on support.dell.com/manuals and read the updates first because they often
supersede information in other documents.

Содержание PowerVault NX3200






































































































































Результаты поиска

Содержание PowerVault NX3200

Отзывы:

Похожие инструкции для PowerVault NX3200

Бренды по названию

Популярные бренды

Dell PowerVault NX3200, Руководство пользователя

Результаты поиска

Содержание PowerVault NX3200

Отзывы:

Похожие инструкции для PowerVault NX3200

Бренды по названию

Популярные бренды