Dell PowerVault DL4000, Руководство пользователя

Страница: 52 / 175

Text Box Description
a. Enter the desired amount of space in the text box.
b. Select the measurement.
Recycle action In the event the path already contains a seed drive, select one of the following
options:
•
Do not reuse — Does not overwrite or clear any existing data from the
location. If the location is not empty, the seed drive write fails.
• Replace this core — Overwrites any pre-existing data pertaining to this
core but leave the data for other cores intact.
• Erase completely — Clears all data from the directory before writing the
seed drive.
Comment Enter a comment or description of the archive.
Agents Select the agents you want to replicate using the seed drive.
NOTE: Because large amounts of data need to be copied to the portable storage device, an
eSATA, USB 3.0, or other high-speed connection to the portable storage device is
recommended.
9. Click Start to write the seed drive to the path that you provided.
10. Send the see drive as directed by the third-party service provider.
Reviewing a replication request
A replication request is sent from the source core to the third-party target core. As the third party, you
can review the request, and then approve it to begin replication for your customer, or you can deny it to
prevent replication from occurring.
To review a replication request on a third-party target core:
1. Open the Core Console on the target core and select the Replication tab.
2. Click Pending Requests (#) .
The Pending Replication Requests section appears.
3. Next to the request that you want to review, select Review from the drop-down menu.
The Review Replication Request window appears.
NOTE: The request completed by the customer determines the information that appears in the
Source Core Identity section.
4. On the Review Replication Request window, do one of the following:
• To reject the request, click
Deny .
• To approve the request:
1. – Select Replace an existing replicated Core , and then select a core from the drop-down
list.
– Select Create a new source Core . Verify the Core Name , customer Email Address , and
Customer ID , editing the information as necessary..
2. Under Agents , select the machines to which the approval applies, and then use select the
appropriate repository for each machine by using the drop-down list.
52