Back panel features of the PowerEdge R930 system
Figure 4. Back panel features of the PowerEdge R930 system
1
Power supply unit (PSU 3 and 4)
2
PCIe expansion card slots
3
Power supply unit (PSU 1 and 2)
4
Video connector
5
iDRAC Enterprise port
6
Ethernet port (4)
7
USB port (2)
8
Serial connector
9
System identification connector
10
System identification button
Table 3. Back panel features of the PowerEdge R930 system
Item
Indicator, Button, or Connector Icon
Description
1
Power supply unit (PSU 3 and 4)
Up to two redundant AC power supplies with a rating of 750 W or
1100 W
2
PCIe expansion card slots (8 or
10 depending on the I/O risers
installed)
Enables you to connect PCI Express expansion cards.
3
Power Supply Unit (PSU 1 and
2)
Up to two redundant AC power supplies with a rating of 750 W or
1100 W
4
Video connector
Use the video/VGA port to connect a display to the system. For
more information about the supported video/VGA port, see the
Technical specifications section.
5
iDRAC Enterprise port
Use the iDRAC8 Enterprise port to remotely access iDRAC. For
more information, see the
Integrated Dell Remote Access Controller
User’s Guide
at
Dell.com/idracmanuals
.
NOTE:
The port is available for use only if the iDRAC8
Enterprise license is installed on your system.
6
Ethernet port (4)
Use the Ethernet port to connect Local Area Networks (LANs) to
the system. For more information about the supported Ethernet
ports, see the Technical specifications section.
About the PowerEdge R930
13