Dell PowerEdge R720 t Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 165

background image

Menu Item

Description

CPU Power
Management

Allows you to set the CPU power management. By default, the CPU Power Management option
is set to System DBPM (DAPC). DBPM is Demand-Based Power Management.

Memory Frequency

Allows you to set the memory frequency. By default, the Memory Frequency option is set to
Maximum Performance.

Turbo Boost

Allows you to enable or disable the processor to operate in turbo boost mode. By default, the
Turbo Boost option is set to Enabled.

C1E

Allows you to enable or disable the processor to switch to a minimum performance state when
it is idle. By default, the C1E option is set to Enabled.

C States

Allows you to enable or disable the processor to operate in all available power states. By
default, the C States option is set to Enabled.

Monitor/Mwait

Allows you to enable Monitor/Mwait instructions in the processor. By default, the Monitor/
Mwait option is set to Enabled for all system profiles, except Custom.

NOTE: This option can be disabled only if the C States option in Custom mode is disabled.

NOTE: When C States is enabled in Custom mode, changing the Monitor/Mwait setting
does not impact system power/performance.

Memory Patrol Scrub Allows you to set the memory patrol scrub frequency. By default, the Memory Patrol Scrub

option is set to Standard.

Memory Refresh Rate Allows you to set the memory refresh rate. By default, the Memory Refresh Rate option is set to

1x.

Memory Operating
Voltage

Allows you to set the DIMM voltage selection. When set to Auto, the system automatically sets
the system voltage to the optimal setting based on the DIMM capacity and the numbers of
DIMMs installed. By default, the Memory Operating Voltage option is set to Auto.

Collaborative CPU
Performance Control

When set to enabled, the CPU power management is controlled by the OS DBPM and the
System DBPM (DAPC). By default, the option is set to Disabled

System Security Screen

Menu Item

Description

Intel AES-NI

The Intel AES-NI option improves the speed of applications by performing encryption and
decryption using the Advanced Encryption Standard Instruction Set and is set to Enabled by
default.

System Password

Allows you to set the system password. This option is set to Enabled by default and is read-only
if the password jumper is not installed in the system.

Setup Password

Allows you to set the setup password. This option is read-only if the password jumper is not
installed in the system.

Password Status

Allows you to lock the system password. By default, the Password Status option is set to
Unlocked.

TPM Security

Allows you to control the reporting mode of the Trusted Platform Module (TPM). By default, the
TPM Security option is set to Off. You can only modify the TPM Status, TPM Activation , and

29

«
...
27
28
29
30
31
...
»

Содержание PowerEdge R720 t






































































































































































Отзывы:

Нет отзывов

Похожие инструкции для PowerEdge R720 t

Бренд: Gateway Страницы: 52

Бренд: Gigabyte Страницы: 2

DECstaion 5000 240

Бренд: Digital Equipment Страницы: 62

Бренд: Arista Страницы: 47

Бренд: Kontron Embedded Computers Страницы: 48

Бренд: Sanyo Страницы: 35

Бренд: ViewSonic Страницы: 2

Бренд: Vxl Страницы: 29

Бренд: Seeed Страницы: 9

Бренд: AXIOMTEK Страницы: 54

Direct Linear DV-7DL Pro

Бренд: Edirol Страницы: 8

Бренд: Parker Brothers Страницы: 8

Valerus Shadow Elite Client Workstation Micro Form Factor

Бренд: Vicon Страницы: 2

Бренд: Dell EMC Страницы: 90

Бренд: ZIPPER MASCHINEN Страницы: 6

Бренд: IEI Technology Страницы: 129

Бренд: IEI Technology Страницы: 148

Бренд: IEI Technology Страницы: 140

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды