Figure 24. Installing the cooling shroud
1.
cooling shroud
2. intrusion switch
3. intrusion switch connector on the system
board
4. guide on the cooling shroud
5. guide pin
Next steps
1.
Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
After working inside your system
System memory
Your system supports DDR4 registered DIMMs (RDIMMs).
NOTE: MT/s indicates DIMM speed in MegaTransfers per second.
Memory bus operating frequency can be 2400 MT/s, 2133 MT/s, or 1866 MT/s depending on the
following factors:
• System profile selected (for example, Performance Optimized, Custom, or Dense Configuration
Optimized)
• Maximum supported DIMM frequency of the processors
The system contains 12 memory sockets split into four sets — two sets of 4 sockets and two sets of 2
sockets each. Each 4-socket set is organized into two channels and each 2–socket set is organized into
one channel. In each channel of the 4-socket set, the release levers of the first socket are marked white
and the second socket black. In the 2-socket set, each release lever is marked white.
86
