3.
Insert the replacement USB memory key into the USB port.
Figure 49. Installing the internal USB memory key
1.
USB memory key
2. USB port
Next steps
1.
Follow the procedure listed in the After working inside your system section.
2.
While booting, press F2 to enter System Setup and verify that the system detects the USB memory
key.
Related Links
Safety instructions
Before working inside your system
After working inside your system
System board connectors
Expansion cards and expansion card riser
An expansion card in the server is an add-on card that can be inserted into an expansion slot on the
system board or riser card to add enhanced functionality to the system through the expansion bus.
NOTE: A System Event Log (SEL) event is logged if an expansion card riser is unsupported or
missing. It does not prevent your system from turning on and no BIOS POST message or F1/F2
pause is displayed.
Expansion card installation guidelines
Your system supports Generation 1, Generation 2, and Generation 3 cards. The following table provides
riser configurations for R430 systems:
122
