manualshive.com logo in svg

Dell PowerEdge R420xr, Руководство пользователя

Поделиться
Скачать
Dell PowerEdge R420xr Скачать руководство пользователя страница 30

iDRAC Settings Utility

The iDRAC Settings utility is an interface to set up and configure the iDRAC parameters using UEFI. You 
can enable or disable various iDRAC parameters using the iDRAC Settings Utility.

NOTE: Accessing some of the features on the iDRAC Settings Utility requires the iDRAC7 Enterprise 
License upgrade.

For more information on using iDRAC, see the

 iDRAC7 User's Guide

 at 

dell.com/esmmanuals

.

Entering The iDRAC Settings Utility

1.

Turn on or restart the managed system.

2.

Press <F2> during Power-on Self-test (POST).

3.

In the System Setup Main Menu page, click 

iDRAC Settings

.

The iDRAC Settings screen is displayed.

Changing The Thermal Settings

The iDRAC Settings utility enables you to select and customize the thermal control settings for your 
system.

1.

Enter the iDRAC Settings utility.

2.

Under 

iDRAC Settings 

→ 

Thermal 

→ 

User Option

, select between the following options:

• Default
• Maximum Exhaust Temperature
• Fan Speed Offset

NOTE: When the 

User Option

 is set to the default 

Auto

 setting, the user option cannot be 

modified.

3.

Set the 

Maximum Air Exhaust Temperature

 or the 

Fan Speed Offset

 fields.

4.

Click 

Back 

→ 

Finish 

→ 

Yes

.

30

Содержание PowerEdge R420xr

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды