Dell PowerEdge R320 Скачать руководство пользователя страница 16

Страница: 16 / 143

Memory indicator

Condition

Corrective Action

The indicator blinks
amber if a memory
error occurs.

See the system event log or system messages for the location of the
failed memory. Reinstall the memory device. If the problem persists,
see

Getting Help

PCIe indicator

Condition

Corrective Action

The indicator blinks
amber if a PCIe card
experiences an
error.

Restart the system. Update any required drivers for the PCIe card.
Re-install the card. If the problem persists, see

Getting Help

Hard-Drive Indicator Patterns

Figure 5. Hard-Drive Indicators

1. hard-drive activity indicator (green)
2. hard-drive status indicator (green and amber)

NOTE: If the hard drive is in Advanced Host Controller Interface (AHCI) mode, the status indicator (on the right side)
does not function and remains off.

Drive-Status
Indicator Pattern
(RAID Only)

Condition

Blinks green two
times per second

Identifying drive or preparing for removal

Off

Drive ready for insertion or removal

Содержание PowerEdge R320
















































































































































Результаты поиска

Содержание PowerEdge R320

Отзывы:

Dell PowerEdge R320, Руководство пользователя, Страница: 16 / 143

Результаты поиска

Содержание PowerEdge R320

Отзывы: