Dell PowerEdge M420, Справочное руководство

Страница: 724 / 1682

724
VLAN Commands
Example
The following example displays how to enable Double VLAN Tunneling at
gigabit ethernet port 1/0/1.
console(config-if-1/0/1)#mode dvlan-tunnel
name (VLAN Configuration)
Use the name command in VLAN Configuration mode to configure the
VLAN name. To return to the default configuration, use the no form of this
command.
NOTE: This command cannot be configured for a range of interfaces (range
context).
Syntax
name
vlan–name
no name
Parameter Description
Default Configuration
The default VLAN name is default .
Command Mode
Interface (VLAN) Configuration mode
User Guidelines
The VLAN name may include any alphanumeric characters including a space,
underscore, or dash. Enclose the string in double quotes to include spaces
within the name. The surrounding quotes are not used as part of the name.
The CLI does not filter illegal characters and may truncate entries at the first
illegal character or reject the entry entirely.
Parameter Description
vlan–name The name of the VLAN. Must be 1–32 characters in length.
2CSPC4.XModular-SWUM200.book Page 724 Thursday, March 10, 2011 11:18 AM