Dell PowerEdge M420, Справочное руководство

Страница: 1517 / 1682

Syslog Commands
1513
79
Syslog Commands
The PowerConnect supports a centralized logging subsystem with support for
local in memory logs, crash dump logs, and forwarding messages to syslog
servers. All switch components use the logging subsystem. Components log
messages to the logging component using one of the following severity levels:
• Emergency (0): system is unusable
• Alert (1): action must be taken immediately
• Critical (2): critical conditions
• Error (3): error conditions
• Warning (4): warning conditions
• Notice(5): normal but significant conditions
• Informational(6): informational messages
• Debug(7): debug-level messages
CLI Logged to Local File and Syslog Server
The PowerConnect Command Logging component logs all command line
interface commands issued on the system. The command log messages are
stored with the other system logs and provide the system operators with a
detailed log of the commands executed.
CLI command logging is configured through any of the PowerConnect
management interfaces. When the feature is enabled, all CLI commands are
logged using the existing logging subsystems. By default, the feature is
disabled.
The CLI command logging severity is set to SEVERITY_NOTICE. The
logging severity is not modifiable by the administrator.
For example, the CLI log message for the user admin is:
<189> JAN 10 18:59:09 10.27.21.22-2
CMDLOGGER[209809328]: cmd_logger_api.c(83) 367 %%
CLI:EIA-232:----:configure
2CSPC4.XModular-SWUM200.book Page 1513 Thursday, March 10, 2011 11:18 AM