Dell PowerEdge M420, Справочное руководство

Страница: 1088 / 1682

1088
OSPF Commands
capability opaque
Use the capability opaque command to enable Opaque Capability on the
router. Use the “no” form of this command to disable Opaque Capability.
Syntax
capability opaque
no capability opaque
Default Configuration
Opaque Capability is enabled by default.
Command Mode
Router Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-router)#capability opaque
clear ip ospf
Use the clear ip ospf command to reset specific OSPF states. If no
parameters are specified, OSPF is disabled and then re-enabled.
Syntax
clear ip ospf [ { configuration | redistribution | counters | neighbor [
interface vlan vlan id
[
neighbor id
] ] } ]
• configuration — Reset the OSPF configuration to factory defaults.
• redistribution — Flush all self-originated external LSAs. Reapply the
redistribution configuration and re originate prefixes as necessary.
• counters — Reset global and interface statistics.
2CSPC4.XModular-SWUM200.book Page 1088 Thursday, March 10, 2011 11:18 AM