
86
|
Installing System Components
6
Align the memory module's edge connector with the alignment key of
the memory module socket, and insert the memory module in the
socket. See Figure 3-14.
NOTE: The memory module socket has an alignment key that allows you to install
the memory module in the socket in only one way.
Figure 3-14. Installing and Removing a DIMM
1
memory module
2
memory module socket
3
memory module socket ejector (2)
7
Press down on the memory module with your thumbs to lock the
memory module into the socket. See Figure 3-14.
When the memory module is properly seated in the socket, the ejectors
on the memory module socket align with the ejectors on the other
sockets that have memory modules installed.
8
Repeat step 4 through step 7 of this procedure to install the remaining
memory modules in the approved configurations. See Table 3-2.
9
Replace the system-board assembly. See "Installing a System-Board
Assembly" on page 69.
Содержание PowerEdge C6105
Страница 1: ...Regulatory Model B03S DellPowerEdgeC6105 Systems Hardware Owner s Manual ...
Страница 10: ...10 Contents ...
Страница 29: ...About Your System 29 ...