Dell PowerEdge 5160, Руководство пользователя

Страница: 61 / 128

Solving Problems
61
IEEE 1394 Device Problems
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide .
D ATA ERROR — The hard drive cannot read the data. See "Drive Problems" on page 57.
T
HE FILE BEING COPIED IS TOO LARGE FOR THE DESTINATION DRIVE
—
The file that you are trying
to copy is too large to fit on the disk, or the disk is too full. Try copying the file to a different disk or use
a larger capacity disk.
A FILENAME CANNOT CONTAIN ANY OF THE FOLLOWING CHARACTERS : \ / : * ? “ < > | —
Do not
use these characters in filenames.
I NSERT BOOTABLE MEDIA —
The operating system is trying to boot to a nonbootable CD. Insert
a CD.
N OT ENOUGH MEMORY OR RESOURCES . E XIT SOME PROGRAMS AND TRY AGAIN —
You have too
many programs open. Close all windows and open the program that you want to use.
O
PERATING SYSTEM NOT FOUND
—
Reinstall the hard drive (see page 81). If the problem persists,
contact Dell (see page 101).
A REQUIRED . D L L FILE WAS NOT FOUND — The program that you are trying to open is missing an
essential file. Remove and then reinstall the program.
1 Click the Start button and click Control Panel
.
2 Click Add or Remove Programs .
3
Select the program you want to remove.
4
Click Remove or Change/Remove and follow the prompts on the screen.
5
See the program documentation for installation instructions.
X : \ IS NOT ACCESSIBLE . T HE DEVICE IS NOT READY — Insert a disk into the drive and try again.
E
NSURE THAT THE
I E E E 1 3 9 4
DEVICE IS PROPERLY INSERTED INTO THE CONNECTOR