Dell PowerEdge 2300, Руководство по обслуживанию

Страница: 78 / 84

A-4 Dell PowerEdge 2300 Systems Service Manual
DELL CONFIDENTIAL - Preliminary 4/2/98
FILE LOCATION: C:\Transition\34365AA0.FM
Serial Port 1
Serial Port 2 Configures system’s built-in serial ports. These
categories may be set to Auto (default) to
automatically configure a port, to a specific
designation (COM1 [3F8h] or COM3 [3E8h] for
Serial Port 1; COM2 [2F8h] or COM4 [2E8h]
for Serial Port 2), or to Off.
Parallel Port Configures system’s built-in parallel port. The
port’s I/O address may be set to 278h, 3BCh,
or 378h (default). Off disables the port.
Parallel Mode Controls whether system’s built-in parallel port
acts as an AT-compatible (unidirectional) or
PS/2-compatible (bidirectional) port.
Diskette Controls operation of the system’s built-in dis-
kette controller.
Speaker Enables or disables the built-in speaker.
Primary SCSI
Secondary SCSI Turns on (default) or off the built-in PCI SCSI
controller and determines if it is scanned as a
boot drive.
Processor Displays microprocessor type and speed.
Level 2 Cache Displays size of integrated cache.
System Memory Displays entire amount of installed memory
detected in system, except for memory on
EMS expansion cards.
Video Memory Displays amount of video memory detected.
Service Tag Displays system’s five-character service tag
number.
Asset Tag Displays the asset tag number up to ten char-
acters if one is assigned.
7DEOH$6\VWHP6HWXS&DWHJRULHV
FRQWLQXHG
&DWHJRU\ )XQFWLRQ