Dell PowerEdge 2300, Руководство по обслуживанию

Страница: 77 / 84

DELL CONFIDENTIAL - Preliminary 4/2/98
FILE LOCATION: C:\Transition\34365AA0.FM
System Setup Program A-3
7DEOH$6\VWHP6HWXS&DWHJRULHV
&DWHJRU\ )XQFWLRQ
Time Resets time on computer’s internal clock.
Date Resets date on computer’s internal calendar.
Diskette Drive A
Diskette Drive B Identifies type of diskette drives installed.
Tape drives are
not reflected in these
categories.
Reserved Memory Designates a region of system board memory
that can be supplied by an expansion card.
This feature should not be enabled unless an
expansion card that requires special address-
ing is installed.
CPU Speed Indicates microprocessor speed at which sys-
tem boots—the microprocessor’s rated speed
or a slower compatibility speed.
Num Lock Determines whether keyboard’s Num Lock
mode is activated at boot.
Reset Button Enables or disables the Reset button on the
front bezel.
Processor 1
Processor 2 Displays status of each microprocessor slot in
the computer.
Fan Speed Sets the fan to full speed or a lower, noise-
reduction speed.
System Alert Sets the system alert to indicate fault (default)
or warning conditions.
Keyboard Errors Enables or disables reporting of keyboard
errors during POST.
Boot Sequence Determines whether system boots from dis-
kette (if present) or hard-disk drive.
Scan Sequence Determines the order in which the PCI devices
are scanned by the system.
System Password Displays current status of system’s password
security feature. Also used to assign and ver-
ify a new password.
Password Status If set to Enabled, prevents the system pass-
word from being changed or disabled.
Requires that Setup Password category be
Enabled.
Setup Password Restricts access to System Setup program.
Mouse Enables or disables the built-in PS/2-
compatible mouse port.