Dell PowerConnect M6220, Руководство по настройке пользователя

Страница: 857 / 1294

Configuring Data Center Bridging Features
857
FIP Snooping Configuration Example
In this example, FIP snooping is deployed on the PowerConnect M8024-k to
serve as a trusted device between the blade server and the FCF switch. Two
external 10G (ports 16 and 17) connect to a pair FCoE-facing switches. These
interface
interface
Enter interface configuration mode for the specified
interface. The
interface
variable includes the interface type
and number, for example tengigabitethernet 1/0/3 .
You can also specify a range of interfaces with the interface
range command, for example, interface range
tengigabitethernet 1/0/8-12
configures interfaces 8, 9, 10,
11, and 12.
fip-snooping port-mode
fcf
Configure the interface to be connected to a FCF switch.
CTRL + Z Exit to Privileged EXEC mode.
show fip-snooping
sessions
Display information about the active FIP snooping
sessions.
show fip-snooping fcf
[ fcf-mac
]
Display information about the interfaces connected to
Fibre Channel forwarder (FCF). Use the optional
fcf-mac
parameter to display additional information about the
session with the specified FCF device.
show fip-snooping
enode [
enode-mac
]
Display information about the interfaces connected to
FCoE end nodes (ENodes). Use the optional
enode-mac
parameter to display FIP snooping sessions between the
given FCF-MAC and ENode-MAC.
show fip-snooping
statistics {vlan vlan_id |
interface
interface
}
Display the statistics of the FIP packets snooped for all the
FIP snooping-enabled VLANs or for the specified VLAN or
interface. FIP session establishment sends some packets
on the native VLAN (which are counted on the interface)
and some packets on the FCoE VLAN (which are counted
in the VLAN).
clear fip-snooping
statistics {vlan
vlan_id
|
interface interface }
Clear the statistics of the FIP packets snooped for all the
FIP snooping-enabled VLANs or for the specified VLAN or
interface.
Command Purpose