Dell PowerConnect J-EX4500, Руководство по оборудованию

Страница: 50 / 226

•
For information about booting the switch from a software package stored on a USB
flash drive, see the
Dell PowerConnect J-Series Ethernet Switch Complete Software
Guide for Junos OS at http://www.support.dell.com/manuals .
Console Port Connector Pinout Information for a J-EX Series Switch
The console port on a J-EX Series switch is an RS-232 serial interface that uses an RJ-45
connector to connect to a console management device. The default baud rate for the
console port is 9600 baud.
Table 14 on page 34 provides the pinout information for the RJ-45 console connector.
An RJ-45 cable and an RJ-45 to DB-9 serial port adapter are supplied with the switch.
NOTE: If your laptop or PC does not have a DB-9 male connector pin and you
want to connect your laptop or PC directly to a J-EX Series switch, use a
combination of the RJ-45-to-DB-9 female adapter supplied with the switch
and a USB-to-DB-9 male adapter. You must provide the USB-to-DB-9 male
adapter.
Table 14: J-EX Series Switches Console Port Connector Pinout Information
Description Signal Pin
Request to send RTS Output 1
Data terminal ready DTR Output 2
Transmit data TxD Output 3
Signal ground Signal Ground 4
Signal ground Signal Ground 5
Receive data RxD Input 6
Data carrier detect CD Input 7
Clear to send CTS Input 8
Related
Documentation
See Front Panel of a J-EX4500 Switch on page 8 for port location.
•
•
Connecting a J-EX Series Switch to a Management Console on page 104
Management Port Connector Pinout Information for a J-EX4500 Switch
The management port on a J-EX4500 switch uses an RJ-45 connector to connect to a
management device for out-of-band management.
34
Dell PowerConnect J-Series J-EX4500 Ethernet Switch Hardware Guide