Dell PowerConnect 55xx Systems User Guide
229
The previously-defined neighbors are displayed along with their states.
The possible states are:
–
Incomplete
— An address resolution is in progress, and the link-layer
address of the neighbor has not yet been determined.
–
Reachable
— The neighbor is known to have been reachable recently
(within tens of seconds).
–
Stale
— The neighbor is no longer known to be reachable, but until
traffic is sent to the neighbor, no attempt is made to verify its
reachability.
–
Delay
— The neighbor is no longer known to be reachable, and traffic
has recently been sent to the neighbor. Rather than probe the
neighbor immediately, however, there is a delay sending probes for a
short while, in order to give upper-layer protocols a chance to provide
reachability confirmation.
–
Probe
— The neighbor is no longer known to be reachable, and
Unicast Neighbor Solicitation probes are being sent to verify
reachability.
2
To clear the Neighbors table, select one of the following options:
–
None
— Does not clear any entries.
–
Static Only
— Clears the static entries.
–
Dynamic Only
— Clears the dynamic entries.
–
All Dynamic and Static
— Clears the static and dynamic address
entries.
3
To add a new IPv6 neighbor, click
Add,
and enter the fields:
–
IPv6 Interface
— Displays the interface on which IPv6 Interface is
defined.
–
IPv6 Address
— Enter the neighbor IPv6 address.
–
MAC Address
— Enter the MAC address assigned to the interface.
Содержание POWERCONNECT 5524
Страница 1: ...Dell PowerConnect 5500 Series System User Guide Regulatory Models PowerConnect 5524 5524P 5548 5548P ...
Страница 86: ...86 Dell PowerConnect 55xx Systems User Guide gi Giga port te Ten Giga port x Unit ID z Port number ...
Страница 415: ...Dell PowerConnect 55xx Systems User Guide 415 ...
Страница 728: ......