Dell POWERCONNECT 5524 Скачать руководство пользователя

Страница: 129 / 728

Dell PowerConnect 55xx Systems User Guide

129

Dynamic VLAN Assignment (DVA)

Dynamic VLAN Assignment (DVA) is also referred to as RADIUS VLAN

Assignment in this guide. When a port is in Multiple Session mode and is

DVA-enabled, the switch automatically adds the port as an untagged member

of the VLAN that is assigned by the RADIUS server during the authentication

process. The switch classifies untagged packets to the assigned VLAN if the

packets originated from the devices or ports that are authenticated and

authorized.
For a device to be authenticated and authorized at a DVA-enabled port:

• The RADIUS server must authenticate the device and dynamically assign

a VLAN to the device.

• The assigned VLAN must not be the default VLAN and must have been

created on the switch.

• The switch must not be configured to use both a DVA and a MAC-based

VLAN group.

• A RADIUS server must support DVA with RADIUS attributes tunnel-type

(64) = VLAN (13), tunnel-media-type (65) = 802 (6), and tunnel-private-

group-id = a VLAN ID.

Dynamic Policy/ACL Assignment

The Dynamic Policy/ACL Assignment feature enables specifying a user-

defined ACL or policy in the RADIUS server. After a successful

authentication, the user is assigned that ACL.

Authentication Methods

The possible authentication methods are:

•

Dot1x

— The switch supports this authentication mechanism, as

described in the standard, to authenticate and authorize Dot1x

supplicants.

•

MAC-based

— The switch can be configured to use this method to

authenticate and authorize devices that do not support Dot1x. The switch

emulates the supplicant role on behalf of the non-Dot1x-capable devices,

and uses the MAC address of the devices as the username and password,

when communicating with the RADIUS servers. MAC addresses for

Содержание POWERCONNECT 5524

























































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание POWERCONNECT 5524

Отзывы:

Похожие инструкции для POWERCONNECT 5524

Бренды по названию

Популярные бренды

Dell POWERCONNECT 5524, Руководство пользователя

Результаты поиска

Содержание POWERCONNECT 5524

Отзывы:

Похожие инструкции для POWERCONNECT 5524

Бренды по названию

Популярные бренды