Dell PowerConnect 5212, Руководство пользователя системы

Страница: 30 / 110

When you start HTTPS, the client and server establish a secure encrypted connection. A padlock icon should appear in the status bar for Internet Explorer 5.x
and Netscape Navigator 4.x.
The Switch/Security/HTTPS page contains the following editable fields:
l
HTTPS Status — Allows you to enable/disable the HTTPS server feature on the switch. (Default: enabled)
l
HTTPS Port — Specifies the UDP port number used for HTTPS/SSL connection to the switch's Web interface. The default is port 443.
To save any changes you make in this page, click Apply Changes . If you don't want to save the changes, click Refresh .
CLI Commands
The following table summarizes the equivalent CLI commands for items in the Switch/Security/HTPS page.
Example
Console(config)#ip http secure-server
Console(config)#ip http secure-port 441
Console(config)#
Jumbo Frame
From the Jumbo Frame page, you can enable and disable jumbo frame support on the switch.
Internet Explorer 5.0 or later Microsoft ® Windows ® 98, Microsoft Windows NT ® (with service pack 6a), Windows 2000
Netscape Navigator 4.76 or later Windows 98, Windows NT (with service pack 6a), Windows 2000, Solaris 2.6
Command Usage
ip http secure-server Enables the HTTPS server on the switch.
Use the no form to disable the HTTPS server.
ip http secure-port port_number Specifies the UDP port number used for HTTPS connection to the switch's Web interface.
Use the no form to restore the default port.
copy tftp https-certificate Copies an HTTPS certificate from a TFTP server to the switch.