Dell P90F Скачать руководство пользователя страница 76 | Manualshive

Страница: 76 / 79

background image

Troubleshooting

Topics:

•

Enhanced Pre-Boot System Assessment (ePSA) diagnostics

•

System diagnostic lights

•

WiFi power cycle

Enhanced Pre-Boot System Assessment (ePSA)
diagnostics

About this task

The SupportAssist diagnostics (also known as system diagnostics) performs a complete check of your hardware. The
SupportAssist diagnostics is embedded with the BIOS and is launched by the BIOS internally. The embedded system diagnostics
provides a set of options for particular devices or device groups allowing you to:

●

Run tests automatically or in an interactive mode

●

Repeat tests

●

Display or save test results

●

Run thorough tests to introduce additional test options to provide extra information about the failed device(s)

●

View status messages that inform you if tests are completed successfully

●

View error messages that inform you of problems encountered during testing

NOTE:

The

SupportAssist

window displays, listing all devices detected in the computer. The diagnostics starts running the

tests on all the detected devices.

Running SupportAssist diagnostics

Steps

1. Turn on your computer.
2. As the computer boots, press the F12 key as the Dell logo appears.
3. On the boot menu screen, select the

Diagnostics

option.

4. Click the arrow at the bottom left corner.

Diagnostics front page is displayed.

5. Click the arrow in the lower-right corner to go to the page listing.

The items detected are listed.

6. To run a diagnostic test on a specific device, press Esc and click

Yes

to stop the diagnostic test.

7. Select the device from the left pane and click

Run Tests

.

8. If there are any issues, error codes are displayed.

Note the error code and validation number and contact Dell.

SupportAssist diagnostic User Interface

SupportAssist diagnostic User Interface

About this task

This section contains information on Support Assist Basic and Advanced Screen.

5

76

Troubleshooting

«
...
74
75
76
77
78
...
»

Содержание P90F
















































































Отзывы:

Нет отзывов

Похожие инструкции для P90F

SIERRA WIRELESS 250U 4G/3G LAPTOP CARD

Бренд: Time Warner Cable Страницы: 5

Joybook 2000 Series

Бренд: BenQ Страницы: 38

Бренд: Clevo Страницы: 156

Бренд: Monster Страницы: 74

Inspiron 14 N4120

Бренд: Dell Страницы: 102

Бренд: Dell Страницы: 106

Inspiron 14 N4120

Бренд: Dell Страницы: 106

Бренд: Dell Страницы: 54

Бренд: Toshiba Страницы: 2

Бренд: Compaq Страницы: 56

Бренд: Packard Bell Страницы: 19

Бренд: AIRIS Страницы: 106

Бренд: StarTech.com Страницы: 2

Бренд: FSC Страницы: 118

Бренд: Dell EMC Страницы: 56

Бренд: Acer Страницы: 86

Бренд: Razer Страницы: 12

ThinkPad R50 Series

Бренд: IBM Страницы: 90

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды