Dell P80F Скачать руководство пользователя страница 122 | Manualshive

Страница: 122 / 135

background image

Power management

Option

Description

AC Behavior

Allows you to enable or disable the computer from turning on automatically when an AC adapter is
connected.

Default setting: Wake on AC is not selected.

Enable Intel
Speed Shift
Technology

●

Enable Intel Speed Shift Technology

Default setting: Enabled

Auto On Time

Allows you to set the time at which the computer must turn on automatically. The options are:

●

Disabled

●

Every Day

●

Weekdays

●

Select Days

Default setting: Disabled

USB Wake
Support

Allows you to enable USB devices to wake the system from Standby.

NOTE:

This feature is only functional when the AC power adapter is connected. If the AC power

adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.

●

Enable USB Wake Support

Wireless Radio
Control

If Enabled, this feature will sense the connection of the system to a wired network and subsequently
disable the selected wireless radios (WLAN and/ or WWAN).

●

Control WLAN radio - is disabled

Wake on LAN

Allows you to enable or disable the feature that powers on the computer from the Off state when
triggered by a LAN signal.

●

Disabled

●

LAN Only

●

LAN with PXE Boot

Default setting: Disabled

Block Sleep

This option lets you to block entering to sleep in OS environment. When enabled system won't go to
sleep.

Block Sleep - is disabled

Peak Shift

This option enables you to minimize the AC power consumption during the peak power times of day. After
you enable this option, your system runs only in battery even if the AC is attached.

●

Enable peak shift—is disabled

●

Set battery threshold (15% to 100%) - 15 % (enabled by default)

Advanced
Battery Charge
Configuration

This option enables you to maximize the battery health. By enabling this option, your system uses the
standard charging algorithm and other techniques, during the non work hours to improve the battery
health.

Enable Advanced Battery Charge Mode- is disabled

Primary
Battery Charge
Configuration

Allows you to select the charging mode for the battery. The options are:

●

Adaptive—enabled by default

●

Standard—Fully charges your battery at a standard rate.

●

ExpressCharge—The battery charges over a shorter time using Dell’s fast charging technology.

●

Primarily AC use

●

Custom

If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.

NOTE:

All charging mode may not be available for all the batteries. To enable this option, disable the

Advanced Battery Charge Configuration

option.

122

System setup

«
...
120
121
122
123
124
...
»

Содержание P80F








































































































































Отзывы:

Нет отзывов

Похожие инструкции для P80F

Бренд: IBM Страницы: 104

Бренд: IBM Страницы: 4

600E - ThinkPad 2645 - PII 400 MHz

Бренд: IBM Страницы: 2

TravelMate 2420 Series

Бренд: Aspire Страницы: 108

AMILO Xa 2528-12P

Бренд: Fujitsu Siemens Computers Страницы: 2

Бренд: Fujitsu Страницы: 128

ESPRIMO Mobile V6505

Бренд: Fujitsu Страницы: 28

Бренд: Toshiba Страницы: 10

DC Power Adapter

Бренд: Radio Shack Страницы: 32

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 1

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды