Installing the Hard Drive
Steps
1. Replace the hard-drive covers on the hard drive.
2. Connect the hard-drive interposer to the hard-drive assembly.
3. Place the hard-drive assembly on the palm-rest assembly.
4. Connect the hard-drive cable to the system board.
5. Align the screw holes on the hard-drive cage with the screw holes on the hard-drive assembly.
6. Replace the four M2x4 screws that secure the hard-drive cage to the palm-rest assembly.
7. Install the:
a. battery
b. base cover
8. Follow the procedures in
After Working Inside Your Computer.
Speaker
Removing the Speakers
Steps
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the:
a.
b.
3. Perform the following steps to remove the speaker:
a. Disconnect the speaker cable from the audio board [1].
b. Remove the 4 M2x2 screws that secure the speakers to the computer [2].
c. Lift the speakers, along with the speaker cable, off the computer [3].
Disassembly and reassembly
17
