Table 4. System setup options—System information menu (continued)
Overview
Processor ID
Displays the processor identification code.
Processor L2 Cache
Displays the processor L2 Cache size.
Processor L3 Cache
Displays the processor L3 Cache size.
Microcode Version
Displays the microcode version.
Intel Hyper-Threading Capable
Displays whether the processor is Hyper-Threading (HT) capable.
64-Bit Technology
Displays whether 64-bit technology is used.
MEMORY
Memory Installed
Displays the total computer memory installed.
Memory Available
Displays the total computer memory available.
Memory Speed
Displays the memory speed.
Memory Channel Mode
Displays single or dual channel mode.
Memory Technology
Displays the technology that is used for the memory.
DIMM A Size
Displays the memory configuration of DIMM A.
DIMM B Size
Displays the memory configuration of DIMM B.
DEVICES
Panel Type
Displays the Panel Type of the computer.
Video Controller
Displays the integrate graphics information of the computer.
Video Memory
Displays the video memory information of the computer.
Wi-Fi Device
Displays the Wi-Fi device installed in the computer.
Native Resolution
Displays the native resolution of the computer.
Video BIOS Version
Displays the video BIOS version of the computer.
Audio Controller
Displays the audio controller information of the computer.
Bluetooth Device
Displays whether a Bluetooth device is installed in the computer.
LOM MAC Address
Displays the MAC address of the LAN on Motherboard (LOM)
Table 5. System setup options—Boot Configuration menu
Boot Configuration
Boot Sequence
Boot Mode: UEFI only
Displays the boot mode of this computer.
Boot Sequence
Specifies the order that the BIOS searches the list of devices to find an
operating system to boot.
By default, ONBOARD NIC (IPV4) is selected
By default, ONBOARD NIC (IPV6) is selected
By default, UEFI Hard Drive is selected
Secure Boot
Enable Secure Boot
Enables secure boot using only validated boot software.
Default: OFF
Secure Boot Mode
Modifies the behavior of Secure Boot to allow evaluation or enforcement of
UEFI driver signatures. Deployed Mode should be selected for normal operation
of Secure Boot.
By default, Deployed Mode is selected.
System setup
63
Содержание P157G
Страница 14: ...14 Removing and installing components ...