6. Close the right and align the screw holes on the right hinge with the screw holes on the system board.
7. Replace the two (M2.5x5) screws to secure it to the palm-rest.
Next steps
1. Install the
.
2. Install the
.
3. Install the
.
4. Install the
.
5. Install the
6. Install the
.
7. Install the
.
8. Install the
.
9. Install the
.
After working inside your computer
.
Palm-rest and keyboard assembly
Removing the palmrest and keyboard assembly
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
.
6. Remove the
.
7. Remove the
.
8. Remove the
.
9. Remove the
.
10. Remove the
.
11. Remove the
.
12. Remove the
.
13. Remove the
.
14. Remove the
.
15. Remove the
.
16. Remove the
.
17. Remove the
NOTE:
The system board can be removed along with the heat sink.
About this task
The following image indicates the location of the palm-rest and keyboard assembly and provides a visual representation of the
removal procedure.
84
Removing and installing components
Содержание P152G
